Characteristics:
Fibre glass mat for combination with resins of high reactivity.
Suitable for repair of car bodies or damaged GRP parts.
Small GRP parts can be shaped with GLASMATTE and resin of high reactivity.
Range of application:
Universal type of fibre glass mat for producing GRP parts.
Suitable for:
- hand laminating as well as for continuous processing
- hardening at higher temperature is possible
- repair of GRP parts, car and boat repair
Instructions for use:
Clean the surface thoroughly and rough up with sanding paper or sand blast.
Cut the GLASMATTE to matching patch size.
Prepare the required quantity of resin.
Brush the resin onto the edges of the repair spot.
Use the remaining resin to soak the prepared GLASMATTE patch.
Place the patch onto the repair spot and lightly press down with the brush.
Physical data:
Weight: 225 g/m2
(+/- 5%) 300 g/m2
(+/- 5%) 450 g/m2
(+/- 5%)
Size: 0,5m2
, 1m2
0,5m2
, 1m2
0,5m2
, 1m2
Thickness: 0,2 mm 0,2 mm 0,25 mm
Thread-fineness: 12,5 tex 25 tex 25 tex
Thread length: - 50 mm 50 mm
Content of organic fabrics: 4,2 % 4,2 % 3,3 %
Humidity: 0,1 % 0,1 % 0,1 %
Solubility of the binder
in styrene: 20 s 20 s 20 s
Storage stability:
No restrictions if stored adequately